Chinese medicine pulse: different pulse signals represent rickets

<

The diagnosis of Chinese medicine is to use a finger at the pulse of the patient's wrist to perceive the patient's pulse. The three parts refer to the three parts of the foot and the nine fingers refer to the light, medium, and heavy forces of the doctor's fingers. The following old TCM health network will introduce you to different symptoms of pulse in Chinese medicine to represent different symptoms that can keep you healthy at all times.


Shen pulse: no tap, re-click is. Features a deep pulse area. The main disease: syndrome. Powerful for the reality, powerless for the virtual. In the evil spirits, the qi and blood block the yang, and the pulse sinks for the real; the organs are weak, the yang qi is trapped, and the pulse gas is weak, the pulse is weak.


Chinese medicine pulse: different pulse signals represent rickets


Late pulse: Slow pulse, (below 60 beats per minute). The main disease: cold syndrome. Power is really cold and powerless is cold. The cold is stagnant, the blood runs slowly, and the pulse is late and powerful for the actual cold syndrome. Yang deficiency, inability to run qi and blood, pulse delay and inability, as cold card. Athletes and heavy manual workers often have late pulse and are in a physiological state.


Fine veins: The pulse is as small as the line and the landing is obvious. The main disease: deficiency syndrome, more common in yin deficiency, blood deficiency. Master wet disease. Yin deficiency can not fill the pulse, or wet evil resistance pulse, pulse small.


Floating pulse: Tap to get, and press to decrease. Features a shallow pulse area. The main disease: the epilogue because the evil pathogen stays on the table, defending against evil, pulse motives in the outside, so the pulse position is shallow. It is superficial and effective; it is powerlessness. Internal injuries due to chronic yin and blood deficiency, yang deficiency, floating outside the virtual yang, pulse floating large power for the danger.

SILCA CUTTERS AFERMARKET

SILCA MACHINE KEY CUTTERS


Product Features

1. Material: Ultra-high hardness and high wear-resistant carbide material from Sweden, the ultra-fine particles ,good wear resistance;

2. Manufacturing process: Fully automated grinding center mirror polishing, sharp edge, low cutting noise;

3. Features: accurate size, cutting edge size accuracy of 0.005mm, high precision of cutting key size; sharp cutter edge;

4. Advantages: Sharp, can cut brass keys and nickel silver keys, smooth edges, no burrs;

5. The tracer point is made of carbide, it has good conductivity, which is not bent, ensuring accurate detection, and will not damage the accuracy of the fixture and the spindle;

Suit for Machine: electronic key cutting machines, such as Viper,QUATTROCODE,TRIAX QUATTRO,TRIAX-e.code,KABA ILCO TRICODE HS

Suit for processing keys: All inner milling slots and outer milling slot keys, suitable for processing nickel silver keys, which can efficiently process original and high-hardness key blanks, such as Honda original keys, STRATTEC key blanks, etc.


Silca Machine,Flat Slotter Delta,Delta Flat Slotter,Mircle Key Cutters

ZHANGJIAGANG KEYCUT CO.,LTD , https://www.keycutblade.com