While producing a wide range of high quality farm equipment, we also produce a wide range of Pig Farm Accessories for our clients to solve your problems in farming. We produce Pig Farm Accessories to solve problems in pig drinking systems and slat flooring systems. Pig Farm Accessories products include a variety of Pig Farm Accessories products such as "Fitting for floor" "Pipe water" "Support for beams". Without exception, these products are the highest quality raw materials, the most carefully designed to ensure the longest service life and the most convenient to use. If you are interested in our products, we will provide you with the best quality service and the lowest price.
Pig Farm Accessories Pig Farm Accessories,Fitting Flooring For Pig,Steel Fitting Flooring,Strong Fitting Flooring HuangHua FengYi Honde Metal Factory , https://www.farrowingcratesfromchina.com
Common faults and treatment methods of three-legged centrifuge
[Common faults and treatments of three-legged centrifuges]
1. increase the noise
Possible reasons: the centrifuge is not placed horizontally, the shock absorption system is damaged; the feeding is uneven, the drum is eroded by the material for a long time; the friction part is not filled with the relevant lubricant; the liquid outlet is blocked.
Treatment method: Check whether the centrifuge is placed horizontally, whether the angle of the shock absorber of the centrifuge is intact; evenly feeding, or adjusting the feeding amount properly; checking whether the drum has a large amount of bonded dry material, can entrust the manufacturer to make a balance Detecting; adding lubricant to the rotor bearing part; checking whether the liquid outlet is blocked, the plugging of the liquid outlet will cause the drum to rotate in the liquid, thereby increasing friction and increasing noise.
2. Spindle temperature rise is too high
Possible reasons: The grease added at the factory has been exhausted, there are tiny debris between the spindle bearings, and the machine speed is too high, exceeding the design capability.
Treatment: Open the spindle to add grease, clean the spindle bearings, and use the centrifuge at the factory standard speed.
3. Motor temperature rise is too high
Possible causes: The machine load is too heavy, the motor speed is too high, and the circuit itself is defective in design.
Solution: Check if the motor is running according to the relevant load and use the motor at normal speed. If everything is normal and the temperature is still rising, please replace it with the motor manufacturer.
The centrifuge is a high-speed operation equipment. Generally, the materials are corrosive materials. During long-term use, it is necessary to check whether the various components of the machine are normal and replace them when necessary to prevent unsafe accidents.
detailed: