Fructo-Oligosaccharide Syrup 55% FOS Syrup,Fructooligosaccharides Prebiotics,Oligofructose,Nutrition Fructo-Oligosaccharide Qingdao Bailong Huichuang Bio-tech Co., Ltd. , https://www.sdblcycn.com
How to use and maintain the sprinkler
First, after starting the pump, no water will be produced for the first 3 minutes. This is normal, but you should check the machine to ensure it hasn't shut down prematurely.
If any abnormal conditions occur during operation—such as unusual noise, vibration, or a drop in water flow—the machine should be stopped immediately. Pay close attention to the bearing temperature, which must not exceed 75°C.
Monitor the nozzle's performance to ensure it rotates smoothly and evenly. Check that it’s not rotating too fast, too slow, or not at all. Also, make sure the steering mechanism moves freely without any issues.
Avoid using water with high sediment content whenever possible. Excessive sediment can cause wear on the impeller and nozzle, potentially affecting crop growth and reducing the system's efficiency.
To adapt to different soil types and crops, replace the nozzle as needed and adjust its speed. You can tighten or loosen the rocker spring to control the rotation speed. The rocker arm is mounted on the rocker shaft and can be rotated to adjust the water depth at the head, helping to regulate the spray head speed. Adjusting the reversal position can also influence the speed of the sprinkler.
Adjusting the nozzle speed is important for optimal performance. Ideally, operate at a slower speed to avoid surface runoff. For small nozzles, aim for 1 to 2 minutes per rotation. Medium nozzles should rotate once every 3 to 4 minutes, while large nozzles may take 5 to 7 minutes per rotation.
Second, maintenance is essential for long-term performance.
Regularly check and tighten any loose parts of the unit to prevent malfunctions.
Lubricate all moving parts according to the manufacturer's guidelines to ensure smooth operation and reduce wear.
Follow the maintenance instructions provided for the power unit and water pump.
If the sprinkler irrigation system will be idle for an extended period, drain all water from the pump. Disassemble the water pump and sprinkler, clean them thoroughly, apply a thin layer of oil, and store them in a dry place. Wash and dry the pipes, coil the hoses, and store them in a cool, dry location. Avoid storing any components in areas with high humidity, acid, alkali, or extreme temperatures.
Finally, make sure to lubricate threaded connections, quick connectors, and other rust-prone parts on the frame regularly to protect against corrosion.