Identification technology of agricultural machinery parts

<

The use of counterfeit agricultural machinery accessories is not only easy to damage, but also affects the overall performance of the agricultural machinery. Therefore, the purchase of agricultural machinery accessories is not allowed. As the saying goes: "I am not afraid of not knowing the goods, I am afraid that the goods than the goods." When buying agricultural machinery parts, pay attention to the following ten points, you can tell the authenticity of the purchased parts.

A look at product certification. Qualified products shall be approved by the National Quality and Technical Supervision Department and be approved for production, inspection and certification, instructions, and precautions for installation. If not, it is mostly fake and shoddy products.

Second, see the specification model. When selecting accessories, it is necessary to observe whether the specification model meets the requirements for use. Some are almost the same from the outside, but they can't be used without paying too much attention.

Third, see if there are assembly marks. The qualified product assembly mark is very clear and obvious. Such as the gear assembly mark, the top mark of the piston, etc. should be clear and complete. Unmarked and unclear marks must not be used.

Four to see if there is no corrosion. Some parts may be rusted, oxidized, discolored, deformed, or aged due to poor storage or long storage time. If any of the above conditions cannot be purchased.

Five to see whether there is distortion. Such as tires, belts, shafts, rods and other storage methods are not appropriate, it is prone to deformation, geometrical dimensions can not meet the requirements of the requirements, it can not be used normally.

Six to see whether there is a crack. The counterfeit and inferior products are viewed from the appearance and have a low gloss, and there are obvious defects such as cracks, sand holes, slag inclusions, and burrs, which easily lead to failures such as oil leakage, water leakage, and air leakage.

Seven to see if there is loose, stuck. Qualified products, assembly parts rotation, gap size meets standards. Fake and shoddy products are either too loose or inflexible.

Eight to see the surface color. Manufacturers of original products, surface coloring are more fixed, are the prescribed color. Generally experienced people can see from the appearance of true and false.

Nine to see the appearance of packaging. The packaging of qualified products emphasizes the quality of the products. The products are rust-proof, waterproof, and anti-corrosive. They are packaged in wooden boxes and are marked with product names, specifications, models, quantities, and names on apparent positions. Some of the accessories are packaged in paper cartons and set in plastic bags. Fake and shoddy product packaging is rough and poor.

Ten to see the trademark and weight. When purchasing agricultural machinery products and accessories, it is necessary to have a trademark awareness and choose Guoyou and Buyou brand-name products. When you purchase accessories, you can use your hand to measure the amount of helium. Most of the counterfeit and shoddy parts are cut corners, light weight and small size.

Car Blanket is also called as auto blanket, as it is normally used for keeping warm in the car.

As a result, it is normally used in the open air. When people go out for a picnic and want to have a snap in the daylight or even spend the whole night outside, then the car blanket would be a best choice for you.

It uses 12V voltage, rather than AC power.

You just need to plug it into cigarette lighter of your car, and it the blanket will keep you warm.


Below image as a reference:

car blanket

Car Blanket

Car Blankets, Heated Car Blanket, Car Electric Blanket, Car Heating Blanket

Ningbo Makeheat Electrical Appliance Co., Ltd , http://www.makeheat.net