Shatian pomelo, summer orange nursery planting, planting techniques

<

First, the technology of pre-planting 1, the selection of land, site preparation: choose energy irrigation, leeward sunny, sandy loam, deep digging more than 1.5 feet, fine fine leveling, and then unpacking, box surface 4 feet, ditch 1.5 feet (management Walkway), ditch 5 inches deep, arched back box-shaped, planted 4 rows of seedlings, plant spacing of 1.3 feet. 2, planting seedlings: the main root only retains 15cm long, the rest cut off, and cut off late autumn shoots. Use 200 g of slurry of glycyrrhizic acid 35 g or 1 bottle of Dripping Fever (200 g) to stir evenly (to promote rooting), and then root the seedling roots with mud. Re-fill the fine soil with a 1.3-foot pocket and the depth and direction of the root, layer back to fill the fine soil, and then set the root water. Second, the planting technology 1, the density of planting: Longevity Shatian pomelo planting generally slow row spacing of 4 meters 5 meters, 4 meters 4 meters slope. The slopes of the summer orange slopes are 3 meters and 3 meters apart, 75 trees are planted in acres, and the spacing of gentle slopes is 3.40 meters and 55 trees are planted in acres. 2. Preparation before planting: Determine the site of planting according to the required spacing and plum blossom shape. Then dig a planting hole with a depth of 1m and a width of 1m at the site of planting. It is required that the topsoil and the soil and soil are separately piled. The green manure (weeds, straw, and slag) can be 50 kg per hole. When backfilling, a layer of green manure is added to the soil. Backfill the topsoil first, and then fill in the soil. When conditions permit, the manure and livestock manure will be poured in the green manure layer, so that the manure will be rapidly decomposed and the turtle will be implanted after backfilling. 3. Seedlings: Generally, the roots of the seedlings that are planted for two years are mostly concentrated in 20-30cm. When the seedlings are raised, they must be excavated to a depth of 40cm to ensure the integrity of the polar system. The soil is more compact than the nursery, and the soil is planted as soon as possible. . 4, colonization. Before planting the trees, all the late autumn shoots of the seedlings are erased. For the long main root section cut off to retain about 20cm, still use 200 pounds of mud plus 1 bottle drops or 35 grams of nitric acid, the roots of the seedlings can be colonized with mud. When planting seedlings, the soil must be stepped on. The planting seedlings must be 10 cm above the soil surface. After planting, the root water should be timely irrigated and each plant should be 20-30kg. If it is sunny after planting, water should be poured every 7-10 days to keep the soil at a certain humidity. Third, post-implantation, management after planting 1. Fertilization. Until the survival of seedlings can be applied. Fertilizer seedlings should be applied thinly. During the growing season (March-September), fertilizer is applied once every half month. Fertilizer uses farmyard manure plus 2 urea per barrel, 5 phosphate fertilizers, and 1-2 scoops per plant per time. 2. Pest control. After germination, the fruit is sprayed twice with 500 times the fruit or 1000 times with the Golden Fortune. The interval time is 10-15 days. One meter long in the autumn when the shoot is in the autumn, the leaf miner is controlled with 800 times liquid of trichlorfon.

Biocide Technical Ingredients

All water based products have plenty of nutrients and water to support microbe growth under favorable conditions.  Microbes invade water based products from multi-point sources, such as contaminated raw materials, poor plant hygiene, untreated water, and not properly preserved recycling materials.  While adding in-can preservatives into the products should not excuse a factory from Good Manufacturing Hygiene Practices (GMHP), proper use of in-can preservatives coupled with GMHP can dramatically minimize the chance of microbial tolerance development, and assure unspoiled products to customers. 

Biocides formulators often use several types of in-can preservatives as active ingredients in their biocidal products for various industrial water based products. One of these active ingredients is benzisothiazolone (BIT).  It has several distinct performance advantages, including good stability at high pH, good stability in the presence of reducing agents, and broad spectrum of activities against many microbes.  

Sunshine Biotech supplies to all industrial biocides formulators with high quality BIT technical ingredients. Besides of BIT, we also provide its derivative, like BBIT, MBIT etc.

Biocide Technical IngredientsBiocide Technical Ingredients

Biocide Technical Ingredients

Biocide Technical Ingredients,Biocide Formula,Biocide Ingredients,Biocide Liquid

Nanjing Sunshine Biotech Co., Ltd , http://www.sunshine-bio.com