As customers have higher and higher requirements for animal reproduction and animal disease diagnosis and treatment, traditional diagnostic methods such as visual inspection, stethoscope listening, thermometer inspection, and percussion and hammering can no longer meet the needs of animal husbandry production and veterinary clinics. Today, B-ultrasound is playing a big role in human medical diagnosis, and in the future, B-ultrasound will also play a role in animal medicine. We should promote the use of veterinary ultrasound scanner step by step according to the actual situation, popularize the knowledge of the use of veterinary ultrasound scanner, take this as an opportunity, and use it as a ladder to improve the level of veterinary practice in our country. Veterinary Ultrasound Scanner,Vet Ultrasound Scanner,Veterinary Ultrasound Machine,Veterinary Ultrasound Equipment Mianyang United Ultrasound Electronics Co., Ltd , https://www.uniultrasonic.com
Automatic filling machine manufacturers summarize the problems that are easy to encounter in use
Automatic filling machine manufacturers summarize the problems that are easy to encounter in use
Most of the automatic filling machine manufacturers are widely used in the food, medicine, and daily chemical industries. Due to the variety of products produced, if there is a failure in production, it will bring about an inferior impact on production. Therefore, companies should learn more about what can happen in machinery and how to deal with it. The filling machine can be guaranteed to be more efficient, high quality and low cost.
Automated filling machine manufacturers summarize the problems that are easy to encounter in use:
First, the automatic filling machine manufacturers fill the amount is not allowed or not discharged
1. The speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed;
2. Is there any foreign matter in the quick-installing three-way control valve? If so, please arrange it. There is air in the leather tube of the three-way control valve and the filling head. If there is air, try to cut or sweep the air.
3. Check if all seals are damaged. If there is damage, please replace them with new ones;
4. Whether the filling valve plug has a stuck appearance or delayed opening. If there is a jam, the valve core should be installed from the head. If the delay is opened, the thin cylinder throttle valve needs to be conditioned;
5. The elastic force of the spiral spring is tightened up and down in the three-way control valve, and the elastic check valve will not open;
6. Is the filling speed too fast, adjust the filling speed throttle valve, and lower the filling speed;
7, all the clamps, leather tube buckle can be sealed, if any, please correct;
8. The magnetic switch is not loose. Please lock it after each adjustment.
Second, the filling machine material from the back end of the material tank has the following reasons: 1. Is the material cylinder in the center of the material cylinder bracket? If the material cylinder has any change, please install it from the head; 2. Is the cylinder piston and piston rod tight? Solid, if loose, please lock; 3, the cylinder piston O-ring is not damaged, if it is damaged, please replace it.
Third, the automatic filling machine manufacturer material cylinder piston push to the top does not come back to the position of the active magnetic switch, press the emergency stop switch, adjust the active magnetic switch from the beginning.