Dust-free grinding machine-water-cooled white sugar sugar cane sugar saccharin crusher-automatic sugar powder machine First, the scope of application: Â Â Â Â Â Â The grinding machine is mainly used for the crushing processing of sugar, white sugar and rock sugar, and the fineness is adjusted between 20-150 mesh. The grinding machine is a crushing device which combines crushing and vacuuming continuous discharging. Second, the working principle: Â Â Â Â Â Â The grinding machine consists of a crushing machine ( chassis, door, turbine, main shaft, screen ) , cyclone ( Shaqon), pulley, motor, dust box and induced draft fan. When sugar grinding machine moving forward, the motor drive shaft and the turbine rotates at high speed. The grinding block on the turbine and the screen ring constitutes a crushing and grinding pair. When the material enters the machine cavity from the hopper, the material closely rubs and strongly impacts on the inner side of the blade of the turbine in the swirling airflow of the turbine, and Grinding again in the gap between the grinding block. While pulverizing the material, the turbine draws in a large amount of air that acts to cool the machine, grind the material, and transport the fines. The fineness of the material pulverization depends on the nature of the material and the size of the screen, as well as the throughput of the material and air. The bearing parts of the grinding machine are equipped with a special labyrinth seal, which can effectively prevent dust from entering the bearing cavity, thus extending the service life of the bearing. A silicone rubber seal is installed inside the door to prevent dust from leaking and contaminating the operating environment. The control particle size can be determined by replacing the screen, and the material can be recovered by the first or second level without dusting. The sugar grinding machine is designed according to GMP standards, and the production process is free of dust and flying. The grinding machine is made of SUS304 stainless steel. The sugar mill main unit is water cooled. The grinding machine has the advantages of small volume, low energy consumption, stable transmission, low noise, high sealing degree, good self-cooling function, convenient disassembly and assembly and replacement of parts. model Motor Power Turbine speed Crushing fineness Yield Fan power WF-250 5.5kw 5000r/min 20-120 mesh 50-200kg/h 1.5kw WF-350 11kw 4500r/min 20-150 mesh 100-300kg/h 2.2kw WF-450 15kw 3800r/min 20-150 mesh 150-500kg/h 2.2kw WF-550 18.5kw 3000r/min 20-150 mesh 200-1000kg/h 4kw WF-650 22kw 2200r/min 20-150 mesh 500-3000kg/h 5.5kw
Electric Hydraulic Operating Table with Imported hydraulic system (Taiwan/German Hoerbiger), low noise, safe and reliable. Table top can slide horizontally (longitudinal shift). Easy for C-arm and X-ray use. Table top is divided into five sections, include head, back, shoulder, seat and leg plate;Electric Hydraulic Operating Table,Table board is radiolucency with X-ray film cassette. Integrated kidney-bridge by shoulder and back section, to provide excellent operation posture of human body engineering. Electric hydraulic brake system for optimum stability. Various functions of the accessories, to suit the needs of different operations.
Electric Hydraulic Operating Table Electric Hydraulic Operation Table,Electric Hydraulic Ot Table,Electric Hydraulic Surgery Table,Electric Hydraulic Surgical Table Shandong Lewin Medical Equipment Co., Ltd. , http://www.operatinglight.nl
Third, technical parameters