Laminar Flow Cabinet is make local air environment with high degree of cleanliness, equipment, air flow for horizontal and vertical laminar flow in two forms. It is widely used in the semiconductor industry, precision instruments, meters, electronic components, optical instruments, chemical industry, smelting purification, magnetic materials, microbial research, medicine and health care, scientific research departments and so on. To improve the product yield, precision, stability, reliability, has a significant role.
Parameter\Model
SW-CJ-1D
SW-CJ-2D
Clean grade
100 Grade@≥0.5μm (209E)
Number of bacteria
≤0.5 per utensil.hour (¢ <90mm> utensil)
Average wind speed
0.3~<0.6m>/s (adjustable)
noise
≤62dB
Half peak value of shaking of shaking
≤5μm
Illumination
≥300Lx
Power supply
AC single-phase 220V/50H
Max. power consumption
0.4KW
0.8KW
Weight
85kg
150 kg
Dimension of working area
700×500×500(W×D×H)mm
1300×570×1600(W×D×H)mm
Overall dimension
850×570×1550(W×D×H)mm
1150×500×500((W×D×H)mm
Specification and number of high effective filter
760*610*50*
610*610*50*
Specification and number of light from firefly/ ultraviolet light
20W*
30W*
Suitable number
Single
Double
Vertical Laminar Flow,Laminar Air Flow ,Vertical Laminar Flow Hood ,Vertical Flow Hood Cangzhou Blue Beauty Lab Instrument Co., Ltd. , https://www.czlabinstrument.com
Maintenance of the machine is an extremely important and regular task. It should be closely coordinated with extreme operations and maintenance. There should be full-time personnel on duty.
1. Maintenance of the machine:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling: rotating bearings, roller bearings, all gears, moving bearings, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately, and eliminated. 2. Installation test:
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
About the installation and maintenance of the mixer
Mixer installation and maintenance: