When the locomotive cannot be repaired due to part damage during driving, the operator may take some emergency measures so that the vehicle can be driven to the repair site and then replaced or repaired. Metal tubing has cracks or trachoma. The rupture can be cut off, find a plastic tube with a certain internal diameter and a certain degree of tightness, and the two ends can be fastened with a thin wire; you can also temporarily apply soap or tape the oil at the leak. The oil pump diaphragm ruptured. Can be patched layer by layer method; or tarpaulin, plastic film, etc. cut into pieces, sandwiched in the use of the film. If the clearance between the rocker arm and the outer rocker arm in the oil pump is too large, the iron skin, iron wire or split pin can be stuffed in the gap and tied tightly with fine iron wire. The valve spring breaks. The two broken springs can be reversed so that they can be used together. If they are broken into multiple sections, the valve clearance adjustment screw can be loosened to close the valve and cut off the oil supply to the cylinder. Work again. Broken fan belt. A small hole can be drilled at both ends of the original fan belt breakage, and it can be temporarily connected by using coarse wire; it can also be twisted into a number of ropes, instead of the fan belt, the rope head should be clamped in the middle, and then use the wire. Securely tied. The fan blade breaks. If only one piece is broken, one piece of the opposite piece can be removed to keep the fan running smoothly. If the fan blade is severely damaged, it can be replaced with a home fan blade, which is mounted on the fan bracket. Water leaks from the head of the cylinder head. If it is caused by the looseness of the water, use a flat iron rod to press up the protruding part of the water, and then use a hammer to knock a few times to make it tight. If it is caused by rust perforation, it can be glued and thick cloth layer by layer. Radiator leakage. When the water inlet and outlet hoses are slightly broken and water leaks, they can be taped with tape or soapy cloth, and then tied with wire or string. When the rupture is severe, the hose can be removed, the ruptured section can be cut off, and tied with a suitable bamboo pipe or string; when the radiator water supply room and the sewage room have holes, they can be laminated with multi-layer tape or use universal The glue plugs up, or is tied with cotton or wooden blocks; the radiator copper tube can be blocked with soap when it leaks slightly; when the leakage is serious, the leaking copper tube can be clipped so that it will not leak. Thermostat failure. After the thermostat fails, the water tank is easy to open, and the thermostat can be removed and the small circulation hole is blocked.
Plant Extract has been classified to two types by extraction methods including the standard plant extract and ratio extract in china local market. If we want to distinguish between the two types ,we can see from the ingredients that we should pay attention to. The standard plant extract will be tested of its special ingredients that in the product maybe by HPLC, UV, TLC etc,but for the ratio extract,we don't pay attention to the special ingredients that in it or not,not to mention the purity of one ingredient.if you still confused about the cllasfication,pls contact us to know more.
Ratio Plant Extracts,Ginseng Root Extract,Plant Extract Powder,Fenugreek Extract Organic Herb Inc. , https://www.extracts.pl