Ducklings management points

<

1. Appropriately strengthening the amount of exercise can promote the development of bones and muscles and prevent excessive fat. Every day, the ducks are given a round-the-clock exercise every day for 5 to 10 minutes, and the activity is 2 to 4 times a day. If there is proper pasture near the duck house, short-range grazing activities can be conducted regularly.

Second, more contact with ducks Young ducks are small, and ducks are especially sensitive to nerves. In youth, they use feeding, watering, grass exchange, and other opportunities, and more contact with ducks to improve duck guts and prevent frightening groups. . For example, when feeding, people can stand by to observe the feeding situation and allow the ducks to walk around their own. When the “puffy duck” is lying beside him, it can be touched by hand. As time goes by, the duck will not be afraid of people. . If ducks are considered timid and fearful, they are not close to each other. This way, the more they avoid being gutsy, the more they are afraid of people when they grow up. When a stranger approaches, or when the environment changes, it is easy to panic and cause serious losses. This is a captive. Ducks differ from grazing ducks. Grazing ducks experience a variety of environments and are bold, while circling ducks need to be consciously trained to improve their guts.

III. Shelter overnight lighting, low-light lighting young ducks during the cultivation period, do not use strong light, requires a standard daily light time stable in 8 to 10 hours, should not be increased before the opening. If natural lighting is used, autumn ducks cultivated in the following six months are most suitable. However, in order to facilitate the ducks to drink at night and prevent rats or birds from walking around when the group is disturbed, low-light lighting should be used throughout the house. For example, a 30-square-meter duck house can light a 15-watt light bulb. When a power failure occurs, emergency lights should be spotted immediately and must not be delayed. The ducklings that have been exposed to low light for a long time will often cause severe panic and cause great casualties in the event of a sudden dark environment.

IV. Strengthening the Prevention of Infectious Diseases There are two major infectious diseases during the Young Duck Period: one is duck plague and the other is cholera. The prevention of the injection of these two infectious diseases must be completed before the start of production. After reaching the peak of production, duck ducks and injections should be avoided as far as possible so as not to affect the production of eggs. The above method also applies to grazing ducks.

V. Establishing a stable management system The living environment of the ducklings is more stable than that of grazing ducks. It is necessary to formulate operating rules based on the habits of the ducks, regular schedules and routines. After forming a routine, keep it as stable as possible and don't change it often. The standard rest system is: (1) 5:30 open the door and let ducks go out, then sprinkle some water grass (green feed) on the surface of the water to allow the duck to bathe, move, and graze. Place utensils such as troughs and basins on the playground (ie duck beach), mix the feed, and feed the first meal. After feeding, allow the ducks to swim freely, swim in the water, and then go to duck beach to rest. The keeper enters the duck house, cleans it and puts hay. (2) From 8:30 to 10:30, ducks are allowed to rest in the house. (3) 10:30 Breeder enters the house, first rushes the duck to make a circular movement in the house for 5 to 10 minutes, then put the duck out of the water, launching activities, sprinkle some water on the surface of the water, let him feed for a while. Then mix the feed and feed it a second time. After the ducks have finished eating, they are allowed to swim freely, swim in the water, and then go to Ya Ya Tan for hair rest. (4) 13:00 to catch ducks to rest in the house. (5) The 15:30 breeder enters the house and drives the duck to make a circular motion for 5 to 10 minutes in the house, and then puts the duck out of the house and launches water. Sprinkle some water on the water and let it feed for a while. (6) Mix the feed between 16:30 and 17:00 for the third feeding. After the ducks have finished eating, they are allowed to swim freely, swim in the water, and then go to Ya Ya Tan for hair rest. The breeder cleans the trough and bowl, and airs it to dry the duck. (7) From 17:30 to 18:00, turn on the electric light, put clean drinking water, and then feed the duck to rest. (8) 21:00 The keeper adds 1 clean water or feeds 1 time (depending on the growth of the duck).

The above operating procedures should be changed as appropriate depending on the age of the duck or the climate change. In the winter, the ducks will be postponed, the ducks will be closed early, and the time for resting and launching water will be shortened; the ducks will be put early in summer and the ducks will be postponed to extend the time of rest at noon and the time of watering in the morning and afternoon.

Small 2D LiDAR Sensor

IT02S, is JRT new product in the early 2019, which is a single-point LiDAR sensor, also called tof distance sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range with high frequency up to 100hz. It's great for Unmanned Aerial Systems. If you need us send you data sheet and spec for this products, offering sample as well, pls tell us, thank you.

IT02S Mini Tof Sensor Module Diagram
IT02S Mini Tof Sensor Module Diagram
Parameters of IT02S:

Accuracy

+/-8cm@ 0.1~3.5m

Measuring Unit

cm

Measuring Range (without Reflection)

0.1-12m

Measuring Time

0.1~3 seconds

Measuring Frequency

100 Hz

Laser Class

Class II

Laser Type

650nm, <1mw, red

Weight

About 5g

Voltage

DC2.5V~+3.5V

Serial Level

TTL 3.3V

Size

46*17*7mm

Operating Temperature

0-40 ℃ (32-104 ℉ )

Storage Temperature

-25~60 ℃ (-13~140 ℉)


IT02S – the High performance-price ratio measurement solution
* low power consumption of single transmit and single receive
* small size: 46*17*7mm
* low cost
* proffessional techinical support

2D Laser Distance Sensor,2D Lidar Sensors,Tof Lidar Distance Sensor, Flight Distance Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserrangfinder.com