When the printer is working for a long time, it may cause abnormal problems due to some internal settings. If such a problem occurs, the coding technician recommends a system initialization for the machine, so that the internal program and settings are returned. The factory setting state returns the machine to normal working condition.

The method of resetting the printer system refers to the instructions for use. However, it should be noted that the system must be powered off when the system is reset. After about 30 seconds, the power is turned on again. Enter the system maintenance and select the P initialization option. The C parameter is initialized, and then the system maintenance is entered from the main interface, and the information and graphics are sequentially initialized. Then power off the printer machine and turn it on again after about 2 minutes. If the machine will report the fault mentioned in the description after booting, it indicates that the reset is successful. If no fault is reported, you need to reset it according to the above steps.