When designing sucking piglets' pens, it is necessary to consider their commonalities as well as their different points, and to meet the special requirements for feeding and management at this stage: First, sows and piglets feed on different feeds. Second, the sow and piglets on the different requirements of the ambient temperature. Third, protect the piglets from being crushed and trampled by sows. According to practical experience, the ideal farrowing and nursing house is divided into three parts: one is the sows' limit for the tiller; the second is the suckling pig activity area; and the third is the piglet incubator. Sows Limiting Bar: Its role is to limit the sow's turn and back. There is a steel pipe at the bottom of the limit bar to prevent the sow from pressing down on the piglet when lying down. The size of the limit bar is generally 2 to 2.1 meters in length, 0.6 to 0.65 meters in width, and 1 meter in height, and a sow trough and a drinking fountain are placed in front of the limit bar. Suckling piglets activity area: Surrounded by a fence of 0.45 to 0.5 meters high, the piglets are active, feeding milk and drinking water. There are feeding troughs and drinkers installed in the activity area. Piglet Incubator: The purpose of the piglet incubator is to provide local heating to meet the piglet's temperature requirements. The incubator can be made of wood or concrete and measures 100 cm in length, 60 cm in height and 60 cm in width. A small door is left on the side of the box for piglets to enter. The size of the small door is: 30 Cm, width 20 cm. Local heating can use infrared light bulbs, can also use electric hot plate. If there is no such condition, you can also graze in the pig bed, which can keep warm and moisture. Tiga-Lok Endo Appliers,Endo Appliers,Endoclip For Hemostasis,Endoscopic Clip Appliers Qingdao DMD Medical Technology Co., LTD , https://www.conston-tech.com