Cultivation time The inoculation period for the back-season cultivation is from June to July, after 20-30 days, the fungus grows from summer to July to August, and from late September to October. Culture formula Formula One: 94% cotton shell, 2.8% corn flour, 1% plaster, 2% right ash, 0.2% urea. Formulation 2: 40% cotton seed hull, 40% wood chips, 10% bran, 8% corn flour, 1% sugar, and 1% plaster. The above formulation moisture content is maintained at 60%-65%. Culture mix and fermentation The water-soluble sugars, urea, etc. are dissolved in water, and the rest of the raw materials are mixed and mixed with water and mixed repeatedly, and piled into a trapezoidal pile with a width of 1-1.5 meters, a height of 1.2-1.5 meters, and an unlimited length. Each stack of 30-50 centimeters is used to drill a vent hole with an aperture of 7-10 cm and two rows of vent holes on each side. The top cover film moisturizes the stack, leaving 30-50 cm below the stack to cover the film. When the temperature of the reactor rises to 65°C-70°C, the reactor is turned and the fermentation is carried out for 7-10 days and turning 3 times. Bagging Bailing mushrooms are used in bags. The growing bag is made of a high-density polyethylene or polypropylene film 0.04-0.06 cm thick, 15-17 cm wide and 35 cm long. Before bagging, the fermented culture medium was adjusted to maintain its moisture content at 60% and its pH was maintained at 7.5-8.5. When bagging, one end of the bag mouth is tied well, and the culture material is evenly packed into the bag. Each bag contains 0.95-1.05 kilograms of culture material. Sterilization The filled bags were autoclaved for 2-3 hours and sterilized at normal pressure for 10-18 hours. After sterilization, remove the bag and cool it in the inoculation room or in a clean place. Vaccination When the bag temperature dropped to 30°C, the bag opening was opened in the inoculation room or inoculation box, and the bacteria species were inserted from both ends or one end under aseptic conditions, and the inoculation amount was 10% of the culture material. Fungal management The species of bacteria bag was taken into the culture room and stacked on the bed frame. The culturing chamber was sprayed with carbendazim for disinfection before being placed in the bacterium bag. After being placed in the bacterium bag, it was sprayed and sterilized once every 5-7 days. The temperature of the culturing chamber is controlled at 22°C-27°C, and the air humidity is maintained at about 70%. Avoid light culture. Germ fungus 10-15 days, when the mycelium at both ends of the material surface, the turning. Breeding 35-40 å¤ mycelium can send full bags. Summer bag After the bacteria bag is placed in the over-summer place, the humidity should be checked regularly and ventilated. When the temperature in the fall cools, the bacteria bags will be moved into the mushroom house for management. The Infrared Thermometer is designed for measuring the human body forehead temperature reference. It is very simple and convenient to use. Accurate temperature measurement in 1 second, no laser spot, avoid potential damage to eyes, no need to touch human skin, avoid cross infection, one-click temperature measurement, and check for flu. It is suitable for home users, hotels, libraries, large enterprises and institutions, and can also be used in hospitals, schools, customs, airports and other comprehensive places, and can also be provided to medical personnel for use in clinics. Infrared Thermometer Reusable Infrared Thermometer,Noncontact Infrared Thermometer,Reusable Medical Infrared Thermometer,Medical Noncontact Infrared Thermometer Guangzhou Aikangli Medical Technology Co., Ltd. , https://www.aikanli.com
The normal body temperature of the human body averages between 36 ~ 37 ℃), exceeding 37.1 ℃ means fever, 37.3_38 ℃ is low fever, and 38.1_40 ℃ is high fever. Life above 40 ° C is always dangerous.
1. Human body temperature measurement: accurate measurement of human body temperature, replacing traditional mercury thermometers. Women who want to have a child can use an infrared thermometer (frontal temperature gun) to monitor the basal body temperature at any time, record the body temperature during ovulation, and choose the right time to conceive, and can also measure the temperature to judge pregnancy.
Of course, the most important thing is to observe whether your body temperature is abnormal at any time, to avoid flu infection, and to prevent swine flu.
2. Skin temperature measurement: To measure the surface temperature of the human skin, for example, it can be used for amputation and re-implantation surgery.
3. Object temperature measurement: To measure the surface temperature of an object, for example, it can be used to measure the temperature of the surface of a tea cup.
4. Liquid temperature measurement: measure the temperature of the liquid, such as the temperature of the baby's bath water. When the baby takes a bath, measure the water temperature, and no longer worry about being cold or hot; you can also measure the water temperature of the milk bottle to facilitate the preparation of Baby's milk powder
5. Room temperature can be measured:
※Precautions:
1. Please read the instructions carefully before the measurement, and the forehead should be kept dry, and the hair should not cover the forehead (please carry out the measurement in the environment of 10 ℃ -40 ℃) to ensure the accuracy of the measurement.
2. The forehead temperature quickly measured by this product is for reference only, and should not be used as a basis for medical judgment. If you find abnormal body temperature, please use a medical thermometer for further measurement.
3. Please protect the sensing lens and clean it in time. If the change of the ambient temperature is too large, you need to place the measuring instrument in the environment to be measured for 20 minutes, wait for it to adapt to the ambient temperature, and then use it to measure more accurate values.