If there is gas in the heating and cooling system of the vacuum degasser, the system is prone to generate air resistance, resulting in poor circulation of the local or the whole system, resulting in the heating system not being hot and the refrigeration system not being cold. At the same time, due to the oxygen contained in the water, the heating (refrigeration) equipment, pipes and steel radiators are corrosive, causing perforation and water leakage.

The presence of gas in the system can also cause corrosion of the pump, directly affecting the safety of the entire system. The vacuum degasser adopts a vacuum degassing method to quickly remove free gas and dissolved gas in the system, so that the system can operate safely and reliably.

Technical features:

1. The exhaust time after the initial water injection of the heating or cooling system can be greatly shortened, which is very beneficial to the initial commissioning operation of the system.

2. Remove the gas in the system to prevent air resistance and ensure stable and reliable system during normal operation.

3. Eliminate pump cavitation and reduce system operation noise.

4, due to the removal of oxygen in the water, will reduce the system's aerobic corrosion, extending equipment use time.

5. Since the gas in the water is removed, gas bubbles are not attached to the surface of the heat exchanger, which improves the heating efficiency.

6. The working time and cycle of the degasser can be adjusted as needed.

7. The capacity of a single system can be up to 150m3; multiple units can be used in parallel.

8, the equipment is easy to install, fully automatic operation, safe and reliable, easy to maintain.