Mixing device operation precautions

<

The mixer is mainly used for experiments with test tubes, colorimetric tubes and small and medium-sized triangular flasks, which are more suitable for chemical reactions, less solutions, and uniform solution speed. It solves the problem that the agitator can't solve, and saves a lot of scientific research time. At the same time, the effect is fast and accurate. It is the experiment time of the universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgical chemical, grain and other units. The laboratory personnel are more ideal and practical instruments.

Precautions when using the mixer:

1. To ensure safety, please ground when using.

2. When using, do not use too much force, pay attention to the position.

3. When replacing the sponge, you can pull off the original sponge, remove it, and put another piece.

4. If you find leakage or non-oscillation for long-term use, please loosen the base screw and take out the base to check if the thread is off and the screw on the eccentric is loose.

5, the machine is 220V power supply straight through, do not understand the electrical comrades do not self-demolition.