Working principle and characteristics of double cone rotary vacuum dryer

<

Double cone rotary vacuum dryer works <br> <br> double cone rotary vacuum dryer is a dried mixture in one of the new dryer. A condenser, a vacuum pump and a dryer are combined to form a vacuum drying device. (If there is no need to recover the refrigerant, the condenser can be used.) The machine has advanced design, simple internal structure, easy cleaning, all materials can be discharged, and the operation is simple. Can reduce labor intensity and improve the working environment. At the same time, because the material rotates and the material does not accumulate on the wall when the container itself rotates, the heat transfer coefficient is high, the drying rate is large, not only energy is saved, but the material is evenly dried and good in quality. Can be widely used in the drying of materials in the pharmaceutical, chemical, food, dye and other industries. Meet the requirements of the drug management standard "GMP".

Double cone rotary vacuum dryer features 1. Reasonable design, convenient installation and commissioning, can adapt to various conditions.

2. With continuous protection device.

3. Energy consumption is only 30% of the centrifugal spray dryer section of the same output

4. The final moisture of the material can be flexibly regulated. 5. The whole drying process is completed under vacuum and low temperature environment, which meets the medical GMP standard and is suitable for heat sensitive materials.

6. High degree of automation, simple operation, and continuous production.

Small 2D LiDAR Sensor

IT02S, is JRT new product in the early 2019, which is a single-point LiDAR sensor, also called tof distance sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range with high frequency up to 100hz. It's great for Unmanned Aerial Systems. If you need us send you data sheet and spec for this products, offering sample as well, pls tell us, thank you.

IT02S Mini Tof Sensor Module Diagram
IT02S Mini Tof Sensor Module Diagram
Parameters of IT02S:

Accuracy

+/-8cm@ 0.1~3.5m

Measuring Unit

cm

Measuring Range (without Reflection)

0.1-12m

Measuring Time

0.1~3 seconds

Measuring Frequency

100 Hz

Laser Class

Class II

Laser Type

650nm, <1mw, red

Weight

About 5g

Voltage

DC2.5V~+3.5V

Serial Level

TTL 3.3V

Size

46*17*7mm

Operating Temperature

0-40 ℃ (32-104 ℉ )

Storage Temperature

-25~60 ℃ (-13~140 ℉)


IT02S – the High performance-price ratio measurement solution
* low power consumption of single transmit and single receive
* small size: 46*17*7mm
* low cost
* proffessional techinical support

2D Laser Distance Sensor,2D Lidar Sensors,Tof Lidar Distance Sensor, Flight Distance Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancemeter.com