When agricultural machinery such as tractor units and combine harvesters are used for field operations, turning and reversing operations are very frequent. It not only affects the unit's operating efficiency, but also increases the wear of the steering system and the walking system and other operating system components. For this reason, the operator should Note the following points: 1, according to the shape of the field, the size and variety of crops, choose a reasonable walking route, to minimize the reversing, that is to reduce the empty travel itinerary to improve operational efficiency. For narrow rectangular blocks, it is better not to turn or turn around. Use the reverse method to complete the arable land, site preparation, or harvesting operations, or reduce the unit's operating efficiency due to excessive number of turning heads. 2. Before turning and reversing the unit, the unit must be raised and the working parts of the agricultural implement stopped. If the farm implement is turning or reversing while it is still in the soil, it will increase the turning radius and increase the load of the engine, which will easily damage the agricultural implements. 3. It is forbidden to "turn dead bends." Because the turning angle is too small, it can easily cause soil pile-up phenomenon, cause uneven surface and reduce the quality of work. 4. When the wheel-type tractor unit crosses a hard and high field, the farm implements should be raised and reversed. 5, crawler tractors do not habitually turn in the same direction when working in the field. As far as conditions permit, the direction of turning must be changed frequently to avoid severe unilateral wear on the steering clutch. Mocha Green Tea,Packaging Matcha Tea Powder,Packaging Matcha Tea,Packaging Matcha SHAOXING ROYAL TEA VILLAGE CO.,LTD , https://www.yccmatcha.com