Small rake correct installation

<

Small-sized rakes are used to cut green and dried corn stalks, wheat stalks, rice straw, and other livestock forages. They can also be used for straw returning to agricultural construction. However, due to the fact that some operators will not properly use and maintain, many problems arise during the operation. This article takes a 9Z-2.5 type mower as an example to talk about the correct installation of a common small mower.

First, before the installation should determine the supporting power (single cylinder small diesel engine, electric motor or small four-wheel tractor). According to the "Product Operation Manual" requirements, the correct choice of power and transmission of the supporting power.

Second, check whether the diameter of the pulley of the power machine matches the diameter of the pulley of the rake, and ensure that the speed of the rake is in compliance with the regulations. The 9Z-2.0 rake has a rotational speed of 800 rpm.

Third, if small diesel engines are used as power, they should be fixed on the concrete floor. And should be able to adjust the position before and after, to tighten the belt.

Fourth, when using a small four-wheel tractor as a power, the tractor's belt guard and the rakes shall be used to remove the two casters at the grass end so that the tractor central rod can be connected with the pin shaft in the middle of the rake frame. The two hanging brackets are hung on the two caster axles, and the bolts are installed, and then the central strap is used to adjust the V strap to be tight and elastic.

5. If the motor is used as a power source, the universal motor base should be used for adjustment so that the axis of the motor is parallel to the axis of the rake and the axis of the two pulleys is aligned. The steering of the turf machine spindle should be in the same direction as the arrow on the housing. In addition, a control knife for the motor power supply should be provided near the processing site so that the power can be turned on or off at any time.

6. The rake must be installed smoothly and the protective cover should be installed. In addition, the grass should be consistent with the natural wind direction. If the machine is not easy to move, it can be achieved by moving out of the grass.

The Chinese herbal medicine extracts Raw Material supplier and manufacturer -- Organic Herb Inc is a China-based company which is committed to producing , developing and exploring straight herbal powder ,plant extracts, nutraceutical ingredients, effective components of Chinese herbs and related products for the pharmaceuticals, beverage , health food and cosmetics industries.OHI follow the c-GMPs for herbal raw material and Straight Powder and we pledge that we will always uphold the highest standards of safety for our customers around the world with competitive market prices. OHI obtains straight powder from organic plant source through the highest standard of manufacture process , so that every one of our powder provides the most nutrients possible.

Raw Material / Straight Powder

Raw Material,Straight Powder,Ginseng Straight Powder,Extract Powder Raw Materials

Organic Herb Inc. , https://www.extracts.pl