First, avoid battery exposure. Electrolyte temperature is too high, it is easy to produce warping deformation, so that the active material off, the wood separator is damaged, it should avoid battery exposure.

Second, choose the right lubricant. In general, the diesel engine oil on the 14th can be used in the summer in the south to ensure that the lubricating oil has sufficient viscosity to reduce the wear of the parts.

Third, promptly replace the oil radiator radiator valve position. When entering the summer operation, the diverter valve should be turned to the position where the oil passage to the radiator opens, so that the lubricant can dissipate heat and maintain the normal temperature of the lubricant.

Fourth, soft water should be added to the tank. In summer, the locomotive warms up quickly, and the water tank is easy to “open the pot”. It is easier to generate scale and soft water should be added in time.

5. When the water tank “opens the pan”, do not add cold water immediately. Run the throttle at low speed for a period of time. After the water temperature drops, add cold water to prevent the relevant parts of the engine vehicle from bursting due to concentrated forces.

6. When using a roller or threshing machine, a layer of iron gauze or nylon gauze should be wrapped in front of the tank radiator and at the mouth of the tank to prevent dirt from entering the tank core and pipes and affecting the cooling effect. In addition, a fire extinguishing cover should be installed on the exhaust pipe to prevent the exhaust pipe from discharging fire on Mars.

7. When the tractor is working continuously for a long time, stop it at a proper time and check the temperature of the tire and the water temperature, oil temperature and machine temperature. Wait until the temperature drops before operating.

VIII. Pay attention to the inflation pressure of tires. It must be kept within the specified range, or 2-3% lower than the standard pressure.

Nine, do not park the tractor for long periods of exposure in the sun to prevent the tire from overheating and explode.

We can customize different size bale net for you to fit any sized bale.

If your bale size is 4` high by 5` wide then you need a MEDIUM SIZED NET that measures 5` x 7`.

If your bale size is 5` high by 6` wide then you need a LARGE SIZED NET that measures 6` x 8`.

1.23m Width Bale Wrap Netting

1.23m Width*3000m(4') bale wrap netting, silage bale net, corn wrap netting

Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com